| Details of design for highway viaducts | 236 | |
| Details of design for open-webbed, riveted girders | 169 | |
| Details of design for pin-connected spans | 170 | 228 |
| Details of design for plate-girder draw-spans | 188 | 190 |
| Details of design for plate-girder spans | 166 | 228 |
| Details of design for rolled I-beam spans | 166 | 227 |
| Details of design for trestles and elevated railroads | 178 |
| Details of design for truss draw-spans | 191 | |
| Details of drums and turntables | 192 | 241 |
| Details of highway bridges | 230 | |
| Details of operating machinery for draws | 204 | |
| Details of trestles | 87 | |
| Details, tests of | 253 | |
| Determination of power for operating and lifting draws | 202 | |
| Development of faculty of judgment | 14 | |
| Diagonals for lateral systems | 172 | |
| Diagonals for vertical sway-bracing | 172 | |
| Diagram of reactions for draw-spans | 141 | |
| Diameters for drums | 123 | 124 |
| Dimensions for trestles | 276 | |
| Dimensions of drawings | 344 | |
| Directions to Contractor | 262 | |
| Direct tension, rivets in | 25 | |
| Disadvantages of combined bridges | 133 | |
| Disadvantages of the arch | 79 | |
| Disagreements between manufacturers and engineers | 10 | 11 |
| Distance between expansion points in elevated rail-roads | 95 | 180 |
| Distribution of load over drum | 123 | |
| Dividing up bracing in trestle towers | 88 | 149 |
| Division of dead load | 152 | |
| Doric order | 43 | |
| Double concentrated load method | 266 | |
| Double rotating cantilever draws | 103 | |
| Drainage of pivot piers | 128 | 195 |
| Drawings, filing of | 344 | |
| Drawings for trestles | 277 | |
| Draws, double rotating cantilever | 103 | |
| Drift-bolting | 279 | |
| Driving field-rivets | 24 | |
| Driving piles | 278 | |
| Driving piles into cylinders | 313 | |
| Drawbridges for various span lengths, styles of | 182 | |
| Drawers for filing drawings | 344 | |
| Drawings | 243 | |
| Drawings, dimensions of | 344 | |